The progressive honing sequence is very simple and does not require the presence of any skilled operators, it consists of a number of vertical honing tools, combined with a horizontal table which index/rotates under the spindles.
Each honing tool is preset to a progressively larger diameter, and as the workpiece passes through the machine's cycle it has its diameter increased in size by each spindle in turn. Each honing tools passes through the bore one single time only. At each pass the tool removes a specific quantity of material and the bore diameter is progressively increased, calibrated and finally finished step by step.
According to the material, the stock removal, the surfance finish and the required geometry, the honing range can include 1 to more than 10 honing tools.
• Cylindricity < 0.01
• Surface finish < 0.05
• Short Cylcle Time
• Process Reliability
• Low workpiece cost.
Hydraulic valves, distribution valves, Gears, ABS, brake cylinder, supercharger, rocker arms, connecting rod, crankcase etc.
|MAS HONING MACHINES SPL20
PROGRESSION SETTING TABLE
HONING TOOLS 16.0
before honing 15.960 ( 0/+0.015)
|NO.||HONING TOOL||GRIT SIZE||STOCK REMOVAL|
Our Honing Tools And Honing Abrasive Sleeves Are Exclusively Consisting Of Diamond Or CBN And Are Designed According To Each Of Your Applications.